ST8 Summing Card

		Model ST8S (As Shown with Section Trim)
		Standard Version Model ST8 Cell Trim Only SPECIFICATIONS The ST8 Summing Card is 6.75" wide X 4.9" long. It has eight 5-position terminal strips for load cell input and one 7-position terminal strip with internally jumped sense terminals for output to the instrument. The board will sum 8 load cells and can be used with expansion terminal strip to sum up to sixteen 350, 700, or 1000 ohm load cells using 2 summing cards. Trimming of signal output is accomplished with eight 25-turn trim pots with up to 5% load cell adjustment with 350 ohm cells. The board can be mounted with the four .22" mounting holes provided, with a spacing of 6.25" X 4.25" on center. This board will mount in Hoffman Enclosures^® using part# A-8P6, A-8P6SS, or A-8P6AL Backing Plates. We offer sever different custom enclosures, see Standard Junction Boxes for Enclosures and Backing Plates we manufacture.
		Section Trim Version Model ST8S With Section Trim SPECIFICATIONS Same as the ST8 Summing Card but has twelve 25-turn trim pots with up to 5% load cell and 7% section adjustment with 350 ohm cells.

		STANDARD FEATURES Lever-Operated Cage-Clamp Spring Terminal Strips By WAGO^®. Bourns^® Trimming Pots 25 ppm Temperature Coefficient Resistors OPTIONS Screw StyleLever-Operated Cage-Clamp Spring Terminal Strips Expansion terminal strip Section Trim Surge protection 50ppm Temperature Coefficient Resistors (not recomended for truck scales)
		Key Benefits Made In USA Highest Quality Components 100% Tested Call for OEM & Quantity Pricing Custom Build Available

Key Benefits

sales@controlweigh.com